Case of 24 Blank 20 oz Faux Leather Tumbler, Insulated Stainless Steel + Lid
- Description
- Specs
- FAQ
- Templates & Instructions
-
This Polar Camel 20 oz. tumbler is wrapped in the luxury of Laserable Leatherette and comes with a clear lid. The tumbler has all the heat/cold retention properties of Polar Camel, the added beauty of Laserable Leatherette, and the durability of both. Tape at the bottom, they fit most cup holders and are available in several colors. They make great awards, personalized gifts, or incentives and are perfect for fundraisers!
Buy 20 oz leatherette tumblers by the piece -
Polar Camel 20 oz. Laserable Leatherette Tumbler with Clear Lid- Specs
- Double-wall, 18/8 food-grade stainless steel, vacuum insulated drinkware
- Holds ice all day
- Keeps hot drinks hot for 8 hrs (temp rating up to 212 degrees)
- Fits most cup holders
- Includes open mouth lid
- 20 oz capacity,
- Overall dimensions: 3 3/8"(L) x 6 7/8"(H)
- Diameter: 3.375
- Height: 6.875
- Weight: 0.91lb
- Colors available: Tan, brown, black to silver, rawhide, gray, blue to silver, pink, rustic to silver, teal, faux bamboo, red, white, purple, basketball leather, football leather
- Double-wall, 18/8 food-grade stainless steel, vacuum insulated drinkware
-
How do I clean after laser engraving?
- Please see the "templates & instructions" tab
How long does it take to ship my blank tumbler order?
- From order receipt until it's packed and on the truck: 1-3 business days
How long does it take to receive my blank tumbler order?
- Pickup: Ready in 1-3 business days. We will send you an email when it's ready.
- Shipped items: Shipping adds an additional 1-6 days after your order is packed, depending on how far you are from Wichita, KS.
- If you are on a deadline, CONTACT US BEFORE ORDERING so we can let you know if we can meet your deadline or if you will need up upgrade shipping.
- Please see the "templates & instructions" tab
-
Template
Coming soon
Lasering & Cleaning Instructions:
RECOMMENDED LASER RASTER SETTINGS:
35 watt DPI 600 Speed 90% Power 35%
60 watt DPI 600 Speed 100% Power 30%
80 watt TROTEC PPI 600 Speed 90% Power 74%
Note: The recommended settings above may need adjustments for
best results.
Settings will vary depending on the brand, watts. and model
TIPS FOR BEST RESULTS
1. Focus right on the leatherette
2. Cleaning should not be necessary with leatherette products. However
if it is, use a baby wipe or a small amount of LA Awesome on a microfiber towel.
3. Confirm the position of your artwork by testing on a separate piece
of leatherette or tape a clear piece of plastic onto the item.
4. Vector cut mask or plastic for placement guides
RECOMMENDATIONS FOR HEAT TRANSFER MATERIAL
When personalizing a Leatherette item with Heat Transfer Material
we recommends:
Use Kota Pro ExPress
Weed: Reverse
Temperature: 240 Degrees Fahrenheit
Pressure: Medium
Time: 4 Seconds
Peel: Hot
Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the Brand watt and model
Lasering Flat:
Not recommended on this item
Lasering in Rotary:
1. Level your tumbler in the rotary before you engrave for best results. For tumblers with variable diameters, like a 30 oz tumbler, you want the area where your design will go to be the part that is level. Refer to your equipment manual for rotary tool leveling instructions.
2. If you're doing a fulll-length engraving, tilt your rotary so the entire area to be engraved is as level as possible. (This is usually the point where the bottom of the tumbler and the band where the powdercoat meets the steel lip are both the same distance from your lens.
3. Focus at the point halfway between the highest and lowest points when the tumbler has been leveled parallel to the laser's x-axis.This is typically very close to where the powdercoat meets the steel lip.